Truck tail plate maintenance knowledge

Truck tail plate usage _ Truck tail plate manufacturer _ Little knowledge of maintenance of truck tail plate:

1. There are 14 tubing joints and counterpin shaft turning parts on all truck tail plates for wetting. Unsalted butter should be added every ten days.

2. Half a year to exchange gear oil once, commonly used gear oil is usually 68# or 46#.

3. The wheel roll damage should be replaced immediately in the future to facilitate maintenance of the truck tail plate as soon as possible.

4. Immediately use cold water to erode the soil, boulders and other dirt adhered to the truck's tail plate. When loading acid, alkali and other etched articles, the tail plate of the truck shall be prevented from being etched by etched articles.

5. Check whether there is any crack in each supporting welding position, whether there is any sloshing in each reversing pin shaft, whether there is any loose, damaged, oil seepage in each hydraulic oil pipe line, etc. Whether some contacts in the power circuit touch well, whether all the keys are normal, whether the cable is damaged.