A new company that safely/

efficiently handles and unloads equipment

Operating hydraulic lifting tailgates, 

fixed bridges, wing-opening car compartments, etc.

0769-81251088

A professional team will help you out
Tailboard manufacturer
Your current location: Home >> News >> Frequently Asked Questions

KeywordsKeywords

Contact UsContact Us

Dongguan Giant Machinery Equipment Co. LTD

Telephone: 0769-81251088

Fax: 0769-81251011

Mailbox: jrjx2000@163.com

Website: en.jurenwb.com

Address: No. 3, Xinghe Lane, Xiangxi Industrial Zone, Liaobu Town, Dongguan City

Tailboard fitting problem solving

2020-10-13 17:27:02
Times


1. The taillights of the truck do not need to be trodden on the back of the frame with a deadweight of more than 3 tons. They should be laid flat.


2. The upper end of the taillight should be at least 250mm lower than the bottom of the slider.


Truck taillights of 3t and under 3t should be erected and the upper end should be at least 250mm lower than the bottom of the bracket.


4. The bottom plate of the car and the rear end channel steel connected with it shall be on the same level, and steps shall not be left.


5. The door buckle at the bottom of the cage shall be made into a bent hook, which shall be fixed on the corresponding holes of channel steel, and no protruding door buckle shall be made on channel steel.


6. The middle part of the tailgate is about 1,000mm and is completely empty.

Tailboard installation, tailboard installation, truck tailboard

Recently Viewed:

Professional to provide security 

for modern logistics

A new company that efficiently handles 

and unloads equipment

Please do not hesitate to contact us

0769-81251088

483955f421e278d1c6fd1ef1612fdbb.png

Add friend consultation

Copyright © Dongguan Giant Machinery Equipment Co. LTD Specializing in Tail plate manufacturer, truck tail plate, car tail plate ,Welcome to inquire!
Guangdong ICP for 2020088054 Technical Support:Dongguan website construction